operators_manual

Table Of Contents
Application Type
Steering Shaft Grease Fittings EP
Brake Treadle Hinge and Roller Engine oil
Lock Cylinders Lock lubricant
Door Hinges Not required - Teflon bushings
Door Latches and Striker Plates Polyethylene grease stick
Door Weatherstrip Silicone lubricant
Hub-piloted Aluminum Wheels Coat the wheel pilot or hub pads with Freylube #3 lubricant (light
colored) or Chevron Zinc lube. Do not get lubricant on the face of
the wheel or the hub.
Manual Transmission Hydraulic Clutch DOT3 or DOT4 (Brake Fluid)
(1) Consult manufacturer or lubricant supplier for special details.
Steering Gear Lubrication
The following recommendations are for
general purpose steering systems (both
TRW and Sheppard).
Application Type
For normal temperatures Automatic Transmission Fluid (ATF) Type E or F or Dexron® III
For cold temperatures of -22ºF (-30ºC) and above ATF Type A
MAINTENANCE - Specification Reference Charts
Y53-6047-2HEN (03/18) 273
5