operators_manual

2. Put one or both hands on the top of
the hood front. Tilt the hood
forward by pulling at the top of the
hood keeping your feet on the
ground for stability. Keep pulling on
the hood until you are certain that
the hood hold open device is
engaged.
Close the Hood
The hood is equipped with a hood hold-
open device. In order for the hood hold-
open device to become engaged, the
vehicle hood must be fully open. Once the
vehicle hood is fully open, the hold-open
latch will automatically engage and will
need to be disengaged by the operator.
The release lever for the hood hold-open
device is located near the front hinge of the
hood.
Pull the lever out to disengage the hood
hold-open device.
When closing the hood, be sure that you
maintain the same point of contact (top of
hood) to control the movement of the hood
as it closes. Gently lower the hood into
place to avoid damage to the hood or cab.
SAFETY - How to open the hood
Y53-6047-2HEN (03/18) 23
1