operators_manual

WARNING
Do not disconnect any lines at the sol-
enoid body. They could be pressurized
which may result in personal injury.
5. Remove the single bolt (with a 13
mm wrench) that holds the
solenoid to the filter housing.
6. Cover the air hose end and the
fitting with tape or something lint
free to keep airline free from
debris.
7. To reinstall the air solenoid, tighten
the 13 mm bolt to 70 ± 5 in- lbs.
8. To reinstall the air line to the
solenoid, push the air hose into the
fitting then pulling on the air hose
to ensure that it is properly seated.
9. Verify that there are no air leaks,
start the engine and allow the air
system to reach operating
pressure. Activate the under hood
air switch and verify that there are
no air leaks.
Disconnecting the air solenoid will allow
the air cleaner housing to be removed to
access the air filter.
Replace Engine Air Filter
Maintenance information about servicing
the engine air intake filter.
If the vehicle has under hood air intake
option, remove the air solenoid first.
MAINTENANCE - Engine Maintenance
244 Y53-6047-2HEN (03/18)
5