operators_manual

Table Of Contents
should always be between the 2
marks on the dipstick.
Engine Oil Dip Stick Markings
1
2
1. High oil level (1)
2. Low oil level (2)
7. Reinstall the dipstick and twist to
lock it in place.
Topping Up the Engine Oil
1. Top up with oil, if necessary, via the
filler opening. Use the correct
grade in the correct quantity. For oil
replacement, please see engine
Operator’s Manual included with
this chassis.
2. After topping up, wait 1 minute and
check the oil level again.
3. Reinstall the oil fill cap and twist to
lock it in place.
Pipe and Hose Clamp Torque
Values
Torque specifications for engine parts.
MAINTENANCE - Engine Maintenance
Y53-6047-2HEN (03/18) 239
5