operators_manual

Table Of Contents
System Component Task I A B C D E
Battery
Boxes, Tool
Boxes, and
Steps
Battery Cable Fasteners Check battery cable fasteners and
tighten as necessary to 10-15 lb-ft
(13.6-20.3 Nm) as specified on the
battery label.
Electrical and
Lights
Headlamps Check the aim and adjust as required.
Warning Lights in Light Bar Check at the ignition start position to
verify bulbs and driver information display
function.
Turn, Stop, Reverse Lights and Signals Visual check.
Alternator Check operation and output.
Check tightness of the pulley nut.
Check the tension of the drive belt; see
Install Engine Belt on page 240.
Check tightness of the terminal hex nuts.
MAINTENANCE - Maintenance Schedule
Y53-6047-2HEN (03/18) 199
5