operators_manual

System Component Task I A B C D E
Battery
Boxes, Tool
Boxes, and
Steps
Battery Cables Check the condition of the cables,
cushion clamps, nylon tie straps, and
routing. Replace a cushion clamp if the
rubber has deteriorated. Repair or tighten
terminals, and secure cables to prevent
chafing. Replace damaged cables (cuts,
cracks, or excessive wear); see Batteries
on page 231.
•
Batteries (ON HIGHWAY and LINE
HAUL)
Check for cracks and damage, electrolyte
level, condition of terminals, and
tightness of holddowns; see Batteries on
page 231.
•
Batteries (OFF- HIGHWAY) Check for cracks and damage, electrolyte
level, condition of terminals, and
tightness of holddowns; see Batteries on
page 231.
•
Battery Box and Tray (ON HIGHWAY and
LINE HAUL)
Check the box integrity. Clean the drain
tube and check for acid leaks. Check
condition of all equipment mounted under
the box.
•
Battery Box and Tray (OFF-HIGHWAY) Check the box integrity. Clean the drain
tube and check for acid leaks. Check
condition of all equipment mounted under
the box.
•
MAINTENANCE - Maintenance Schedule
198 Y53-6047-2HEN (03/18)
5