operators_manual

System Component Task I A B C D E
Steering
Components
Steering Linkage Check all joints for excessive lash:
replace as required; see Steering System
on page 258.
•
Draglink Tube Clamp and Ball Socket Check the torque: tighten to specified
torque value as required.
• •
Pitman Arm Clamp Bolt and Nut Check the torque: tighten to specified
torque value as required.
• •
Steering Intermediate Shaft Check the torque on the pinch bolt and
nut.
• •
Steering Intermediate Shaft U-joints (ON
HIGHWAY)
Lubricate [EP NLGI #2 HD grease,
+325°F to -10°F (+163°C to -23°C)
range].
• •
Steering Intermediate Shaft U-joints
(OFF HIGHWAY or CITY DELIVERY)
Lubricate [EP NLGI #2 HD grease,
+325°F to -10°F (+163°C to -23°C)
range].
• •
Draglink and Tie Rod Arm Ball Sockets
(ON HIGHWAY)
Lubricate (EP NLGI #2 lithium-based,
moly-filled, HD grease).
• •
Draglink and Tie Rod Arm Ball Sockets
(OFF HIGHWAY or CITY DELIVERY)
Lubricate (EP NLGI #2 lithium-based,
moly-filled, HD grease).
• •
MAINTENANCE - Maintenance Schedule
194 Y53-6047-2HEN (03/18)
5