operators_manual

System Component Task I A B C D E
Auxiliary
Transmission
Cotta Transfer Case TR2205 Fabco
Transfer Case TC142/TC143/TC170/
TC270 Marmon-Harrington Transfer
Case MVG2000/MVG2000SD
Inspect: Check oil level, inspect for leaks
and any visible damage.
•
Initial oil change: Drain oil while warm:
flush case with gear oil-compatible fluid,
clean magnetic drain plug, and refill. Do
not flush the case with any solvent.
• •
Change oil. •
Air Intake Air Intake Piping, Mounting, and Charge
Air Cooler
Check the system for broken pipes,
leaks, joint integrity, cleanliness, and
proper support; see Air Intake System on
page 242.
•
Air Cleaner Replace the engine intake air cleaner
element.
When required by air restriction
indicator or required by the
engine manufacturer's operator
manual.
Clutch Clutch Hydraulic Fluid Replace fluid and bleed system. 240,000 miles/384,000 km or 2
years, whichever occurs first.
Clutch Release Bearing Lubricate. •
Inspect and adjust when necessary (no
adjustment required for SOLO type
clutches)
•
MAINTENANCE - Maintenance Schedule
190 Y53-6047-2HEN (03/18)
5