operators_manual

Table Of Contents
System Component Task I A B C D E
Drum Brakes
(All)
Slack Adjusters Check the push rod travel and check the
control arm for cracks. Adjust at reline;
see Auto Slack Adjuster on page 215.
Lubricate (NLGI #2 grease).
Brake Camshaft Bearing Check for excessive camshaft play in the
axial and radial directions. Max allowable
play is 0.003 in. Lubricate (NLGI #2
grease).
Brake Treadle Valve Clean the area around the treadle, boot,
and mounting plate. Check the pivot and
mounting plate for integrity. Check the
plunger boot for cracks. Lubricate roller
pin, pivot pin, and plunger (NLGI #2
grease).
Brake Air System Check air lines and fittings for leaks; see
How to Check for Air System Leaks on
page 212. Adjust routing as required to
prevent chafing. Check tank mounting
and condition.
Clean or replace the inline filters.
Brake Lining Inspect: replace as required.
MAINTENANCE - Maintenance Schedule
Y53-6047-2HEN (03/18) 185
5