operators_manual

System Component Task I A B C D E
Front Axle Total Vehicle Alignment Check and adjust as required. • •
Steering Knuckle Spindles, Thrust
Bearings, Kingpins, Drawkeys, Tie Rod
Ends, Steering Stops, and Bushings.
Inspect for wear and damage and
endplay. Shim or replace as required;
see Front Axle and Suspension on page
248.
•
Kingpin Bushings, Thrust Bearings, and
Tie Rod Ball Ends
Lubricate with approved grease.
•
Drawkeys Tighten nuts • •
Front Axle
(Dana)
Total Vehicle Alignment Check and adjust as required. • •
Kingpin Bushings, Thrust Bearings, and
Tie Rod Ball Ends (ON HIGHWAY)
Lubricate with approved grease.
•
Kingpin Bushings, Thrust Bearings, and
Tie Rod Ball Ends (OFF-HIGHWAY)
Lubricate with approved grease.
•
Steering Knuckle Spindles, Thrust
Bearings, Kingpins, Drawkeys, Tie Rod
Ends, Steering Stops, and Bushings (ON
HIGHWAY)
Inspect for wear and damage and for
endplay. Shim or replace as required.
•
Steering Knuckle Spindles, Thrust
Bearings, Kingpins, Drawkeys, Tie Rod
Ends, Steering Stops, and Bushings
(OFF-HIGHWAY)
Inspect for wear and damage and for
endplay. Shim or replace as required.
•
MAINTENANCE - Maintenance Schedule
178 Y53-6047-2HEN (03/18)
5