operators_manual

How to lock and unlock the cab
doors
Information on locking your vehicle.
The vehicle has one key for cab doors,
ignition, and the optional sleeper luggage
compartment. Frame-mounted tool box
locks and locking fuel tank caps each have
separate individual keys.
WARNING
To help lessen the chance and/or se-
verity of death or personal injury in
case of an accident, always lock the
doors while driving. Along with using
the lap shoulder belts properly, locking
the doors helps prevent doors from in-
advertently opening and occupants
from being ejected from the vehicle.
To lock or unlock the doors from outside
the cab:
1. Insert the key in the lock.
2. Turn the key toward the rear to lock
of the vehicle (clockwise); forward
(counter clockwise) to unlock.
Remote Keyless Entry
Remote Keyless Entry (RKE) option is a
system that adds security and convenience
to your vehicle. The system will lock or
unlock cab doors with the key fob. The
system will alert you with parking lights
when the selected doors are locked or
unlocked. The system includes two key
fobs that provide secure rolling code
technology that prevents someone from
recording the entry signal.
NOTE
FCC ID: L2C0031T IC: 3432A-0031T
FCC ID: L2C0032R IC: 3432A-0032R
This device complies with Part 15 of
the FCC Rules and with RSS-210 of
Industry Canada. Operation is subject
to the following two conditions (1) This
device may not cause harmful interfer-
ence, and (2) This device must accept
any interference received, including in-
terference that may cause undesired
operation. Changes or modifications
not expressively approved by the party
responsible for compliance could void
the user's authority to operate the
equipment. The term IC: before the ra-
dio certification number only signifies
that Industry Canada technical specifi-
cations were met.
The key fob uses one CR2032, 3V battery.
Batteries should last approximately three
years, depending on use. Consistently
reduced range is an indicator that the
battery needs replacement. Batteries are
available at most discount, hardware, and
drug stores. The battery can be accessed
by removing the cover of the key fob. After
a new battery is installed, the key fob must
be synchronized with the vehicle.
How to replace key fob battery
How to replace the battery in the key fob
If the key fob will not unlock the doors,
replace the battery.
1. Remove the cover of the key fob.
2. Replace the battery and dispose of
the old battery.
3. Synchronize the key fob with the
vehicle.
SAFETY - Cab Access
14 Y53-6047-2HEN (03/18)
1