operators_manual

minutes.
Level 3 (Green) Following Distance Alert
Level 2 (Yellow) Following Distance Alert
This warning is active when the following
distance is less than what is set in the
system. This warning is more severe than
the Level 3 Following Distance Alert.
Level 1 (Red) Following Distance Alert
WARNING
Following Distance
Increase Gap to
Vehicle Ahead
This warning is active when the following
distance is less than what is set in the
system. This warning tone is the most
severe following distance alert.
Brake Command Warning
The system first displays the Collision
Alert so that the driver can address the
situation without the system using
foundation brakes. If the brakes are not
engaged by the driver, the system will
attempt to slow the vehicle by applying the
brakes to assist the driver in reducing the
severity of or potentially avoiding a
collision. At this point, the information
display will change from Collision Alert to
Collision Alert BRAKE!
The warning is active when the driver must
take immediate evasive action by applying
more braking power and/or steering clear
of the vehicle ahead to avoid a potential
collision.
The system can also detect stationary
objects in the vehicles path. The operator
needs to take control of the vehicle to
avoid the stationary object. The icon will be
accompanied with a pop-up message but
no audible sound.
Active Cruise and Braking (ACB) Fault Alert
This warning is presented to alert the
operator that the Adaptive Cruise system is
malfunctioning and will be disabled. The
operator will need to resume control of the
vehicle’s throttle and brakes. The system
DRIVING - Engine Operations
138 Y53-6047-2HEN (03/18)
4