operators_manual

7. Select - press to choose the setting
being changed while adjusting the
either the time or the alarm
8. Time and Alarm value setting -
press to change time/date and or
alarm setting
9. Active alarm icon - alarm is
activated when this icon appears
Turning the Alarm On/Off
Press the ALM button to turn the alarm on
and off. The icon (9) will illuminate when
the alarm is active. When time reaches the
set time the alarm will ring. If the SNZ
button is not pressed, the alarm will
continue ringing for 15 minutes then will
automatically stop. Pressing any other
button except SNZ (2) will turn the alarm
off.
Snooze Operation
When the alarm is ringing press the SNZ
button (2) to silence the alarm for 9
minutes. The small bell icon (9) will flash
until the alarm is shut off. The SNZ button
can be used as many times as desired.
Dim Control Operation
Press the DIM+ or DIM-buttons (3, 4) to
change the brightness of the display.
Set the Sleeper Alarm Clock Time
These are instructions to set the time on
the optional alarm clock installed in the
sleeper.
1. Press the MODE button until the
screen begins flashing.
2. Use the UP and DOWN buttons to
adjust the value.
3. Press the SEL button to adjust the
next setting and use the UP and
DOWN buttons to change the
value.
4. Repeat this for all settings. The
alarm clock will scroll in the
following order each time you press
the SEL button.
• Year
• Month
• Day
• Hours
• Minutes
5. Press the MODE button once you
have set the minutes which will exit
and save your settings.
Set the Sleeper Clock Alarm
These instructions are to set the time for
which the alarm will sound.
1. Press the
MODE button twice until
the screen displays the AL icon.
2. Use the UP and DOWN buttons to
adjust the setting.
3. Press the SEL button to adjust the
next setting and use the UP and
DOWN buttons to change the
setting.
4. Repeat this for all areas. The alarm
clock will scroll in the following
order each time you press the SEL
button.
• Hours
• Minutes
5. To exit and save your settings,
press the MODE button once you
have set the minutes.
Cab Accessories
General accessories in the cab.
Radio (Optional)
As an option, your vehicle has either an
AM/FM Stereo Receiver, which may or
may not have a CD, or may have the
stereo system integrated with your
Navigation and telematics unit. For
CONTROLS - Cab Accessories
Y53-6047-2HEN (03/18) 121
3