operators_manual

2. Mirror Adjust
3. Left or Right Mirror Adjust Selector
4. Window Controls
5. Door Lock Control
Mirror Heat Switch
Your vehicle may be equipped with
optional heated mirrors. Mirror heat is
controlled by the mirror heat switch button,
which is part of the mirror switch module
located on the driver side door pad. If the
vehicle has optional hood mounted heated
mirrors, this switch will also activate heat to
those mirrors.
Power Mirror Switch
If your vehicle is equipped with power
mirrors, the directional controls for both
mirrors are located near the top of the
driver side door trim pad.
Power Door Lock Switch
Power door lock rocker switches are
located on the door pads. To lock or unlock
both cab doors as well as a sleeper door,
depress any door lock switch at the end
that displays a closed or open padlock
symbol, respectively, on the switch face.
Power Window Switch
Power window rocker switches are located
on the door pads. Depress the switch to
open the window or pull up on the switch to
close the window. Release the switch to
stop window movement. The drivers side
window has an express down feature.
Pushing on the switch all the way down
until the switch bumps will activate the
express down feature. Release the button
and the window will continue to open until it
is completely open.
How to Use Power Mirror
Adjustment Switches
Use these instructions to adjust the power
mirrors on the vehicle.
WARNING
Adjust all mirrors before driving. Ad-
justing the mirrors while driving can
cause you to take your eyes off the
road, which could result in an accident.
Failure to do so could lead to serious
injury or equipment damage.
WARNING
Convex mirrors can distort images and
make objects appear smaller and far-
ther away than they really are. You
could have an accident if you are too
close to another vehicle or other ob-
ject. Keep plenty of space between
your vehicle and others whenyou turn
or change lanes. Remember that other
objects are closer than they may ap-
pear.
1. Move the mirror selector switch (3)
to the right or left from the neutral
center position to select the desired
mirror for adjustment.
2. Depress the mirror directional
control pad (2) in one of its four
arrow directions to adjust the mirror
in/out or up/down.
3. To provide good visibility, adjust the
mirror so the side of your vehicle
appears in the inboard part of the
mirror.
4. After mirror adjustments have been
completed, return the mirror
selector switch back (3) to the
center (neutral) position to prevent
CONTROLS - Door Mounted Controls
110 Y53-6047-2HEN (03/18)
3