operators_manual

CAUTION
DO NOT use antifreeze or engine
coolant in the windshield washer res-
ervoir, damage to seals and other
components will result.
To override this function, turn the
headlights on and then off again and the
low beams will turn off. Permanently
overriding this functionality is attainable via
the Settings Menu in the instrument cluster
display. Go to Settings - > Wiper Interlock
and turn this value to OFF.
Avoid running the wiper blades over a dry
windshield to prevent scratching the glass.
Spray on washer fluid first. A scratched
windshield will reduce visibility.
A seven-position rotary wiper switch
(located on the turn signal lever) operates
the windshield wipers and washer. If you
need to use the windshield wipers:
1. Rotate the end of the turn signal
lever to change the wiper mode
from off to on.
2. Continue to rotate the outer knob of
the turn stalk lever to adjust the
wiper speed.
• 4 levels of intermittent speeds
• Low wiper speed
• High wiper speed
How to Spray Windshield Washer
Fluid
This vehicle is equipped with a functrion to
wash the windshield and simulatenously
engage the wipers.
CAUTION
If the electric pump is operated for a
long period (more than 15 seconds)
with a dry reservoir, the pump motor
may be damaged.
If you need to use the windshield wipers
washer:
1. Push the outer knob in.
• Press and hold will activate the
washer fluid and wipers.
• Instant press and release will
activate the washer fluid only.
Controls on the Right
Hand of the Steering
Column
The lever on the right hand side of the
steering column will operate the engine
brake for vehicles with manual
transmissions and Allison Automatic
transmissions.
CONTROLS - Controls on the Right Hand of the Steering Column
106 Y53-6047-2HEN (03/18)
3