operators_manual

done by navigating the menu via the Menu
Control Switch.
Information Display
The Driver Information Display is located at
the top of the instrument cluster.
WARNING!
Do not look at the Instrument Cluster Dis-
play for prolonged periods while the vehicle
is moving. Only glance at the monitor briefly
while driving. Failure to do so can result in
the driver not being attentive to the vehicle’s
road position or situation, which could lead
to an accident and possible death, personal
injury or equipment damage.
It displays important vehicle information
through a constant monitoring of systems
when any of the following conditions are
met:
1. Ignition key in ON or ACC positions
2. Ignition timer is active
3. Menu Control Switch (MCS) button
is pushed (independent of ignition
key switch position)
4. Clock alarm sounds
5. Driver or passenger door is opened
6. Hazard warning lamp switch is on
The various functions may be accessed by
navigating through Menu Screens using
the MCS. The bullets in the Menu Bar
allow access to each item by pushing the
MCS when the desired bullet is highlighted.
In addition to a blank screen, the following
are menu items and the information
available within each menu selections.
NOTE
Some Driver Information Display functions
are only accessible when the vehicle is
parked. Other functions are accessible while
the vehicle is moving or when parked. Each
function is identified in the following descrip-
tions.
Virtual Gauges
The virtual gauges function is selected
through the rotary MCS knob and is
available in both parked and driving
modes.
Rotating the MCS to this menu will allow
you to view the most recent virtual gauge.
While in this menu, press the MCS to scroll
through all of the available virtual gauges
on the truck.
CONTROLS - Information Display
Y53-6096-1A1 (01/17) 69
3