operators_manual

NOTE
For more information about the stability con-
trol system installed on your vehicle, please
refer to additional material supplied with this
operator manual, included in your glove box
informational packet.
Axle, Front Driven
This icon will appear when the front driven
axle is engaged.
Axle, Oil Temperature (Forward or
Rear)
This warning icon is to alert the operator of
elevated axle lubricant temperature.
These temperatures will vary with the kind
of load you are carrying and the driving
conditions you encounter. Maximum axle
temperature may vary, depending upon the
axle and type of lubricant. Very high
temperatures signal a need to have your
axle(s) lubrication checked.
CAUTION
Driving with very hot temperatures in your
rear drive axles can cause serious damage
to axle bearings and seals. Have your axle
lubrication checked if you notice a sign of
overheating.
Depending on the vehicle configuration,
there may be a single gauge for more than
just the forward and rear driver. The icon
will have a label FWD or REAR to
represent which axle the temperature is
causing the warning light.
Brakes, Anti-Lock Brake System
Illuminates during the Instrumentation
System Self Test. Have the ABS system
checked by an authorized dealer if the ABS
Warning Lamp stays on for more than 3
seconds.
• Illuminates during normal operating
conditions to indicate a problem with
the ABS System.
• Illuminates when a problem exists
with Automatic Traction Control
(ATC).
See Also
Automatic Traction Control on page 107
Brake, Park Brake
Illuminates in the status indicator when
parking brakes are applied.
Brakes, Trailer Anti-Lock Brake
System
Illuminates during the Instrumentation
System Self Test and the tractor/truck is
connected with a ABS equipped trailer.
CONTROLS - Guide to the Warning Symbols
Y53-6096-1A1 (01/17) 59
3