operators_manual

WARNING!
Do not exceed the specified load rating.
Overloading can result in loss of vehicle
control, either by causing component fail-
ures or by affecting vehicle handling. Ex-
ceeding load ratings can also shorten the
service life of the vehicle. Failure to comply
may result in death or personal injury.
NOTE
GVW is the TOTAL SCALE WEIGHT the ve-
hicle is designed to carry. This includes the
weight of the empty vehicle, loading plat-
form, occupants, fuel, and any load.
Noise Emission Label
The Noise Emission Label is located in the
driver's side door frame. It contains
information regarding U.S. noise emission
regulations, chassis number, and date of
manufacture.
Paint Identification Label
The Paint Identification Label contains the
paint colors used by the factory to paint
your vehicle. It lists frame, wheels, cab
interior and exterior colors. This label is
located inside the glove box.
Federal Safety Standard
Certification Label
The NHTSA regulations require a label
certifying compliance with Federal Safety
Standards, for United States and U.S.
Territories, be affixed to each motor vehicle
and prescribe where such label may be
located. This certification label, which
indicates the date of manufacture and
other pertinent information, is located on
the driver’s side door edge or on the
driver’s side door frame.
Component Identification
Each of the major components on your
vehicle has an identification label or tag.
For easy reference, record component
numbers such as, model, serial, and
assembly number.
INFORMATION - Vehicle Identification Labels
226 Y53-6096-1A1 (01/17)
6