operators_manual
Table Of Contents
- Safety
- Applies To
- Using this Manual
- Safety Alerts
- Illustrations
- General Safety Instructions
- Data Recorder
- Environmental Protection Agency
- A Special Word About Repairs
- Additional Sources of Information
- Cab Access
- Cab Tilting
- Standard Seat
- What to do before starting the vehicle
- Vehicle Loading
- Visual inspection while approaching the vehicle
- Weekly Checks
- Daily Checks
- Emergency
- Roadside Assistance
- How to Recover a Vehicle
- Manually Release the Parking Brake
- What is a Recovery Hitch?
- How to use a Recovery Hitch
- How to Prepare the Axles for Towing
- How to Manually Lock a Differential
- Recovery Hitch Capacities
- What are the Best Practices for Recovery Rigging?
- Returning to Service After Recovering
- What to do if the Vehicle is Stuck in Sand, Mud, Snow or Ice
- Towing the Vehicle
- Controls
- Getting to Know the Dash
- Gauges in the Center Cluster
- Left Hand Accessories Overhead
- Right Hand Accessories Overhead for Dual Sit Steer Applications
- Guide to the Warning Symbols
- Axle, Traction Control
- Axle, Stability Control
- Axle, Front Driven
- Axle, Oil Temperature (Forward or Rear)
- Brakes, Anti-Lock Brake System
- Brake, Park Brake
- Brakes, Trailer Anti-Lock Brake System
- Emissions, High Exhaust System Temperature
- Emissions, Malfunction Indicator Lamp
- Emissions, Engine Derate
- Diesel Particulate Filter (DPF) Warning Lamp
- Diesel Exhaust Fluid (DEF) Lamp
- Fifth Wheel Slide, Unlocked
- Engine, Check Engine
- Engine, Low Coolant Level
- Engine, Coolant Temperature
- Engine, Oil Temperature
- Engine, Oil Pressure
- Voltmeter
- Engine, Overspeed Air Shutdown
- Engine, Retarder (Brake)
- Engine, Stop Engine
- Engine, Wait To Start
- Engine, Air Filter Restriction
- Fuel Filter Restriction
- Fuel Water In Fuel (WIF)
- Lights, High Beam
- Suspension Dump
- Seat Belt Fasten
- Tire Inflation (TPMS)
- Transmission, Check
- Transmission, Neutral
- Transmission, Oil Temperature High
- Turn Signal, Left
- Turn Signal, Right
- Introduction
- Speedometer
- Tachometer
- Engine - Coolant Temperature
- Fuel Level
- Engine, Oil Pressure
- Diesel Exhaust Fluid (DEF)
- Vehicle Air Pressure
- Driver Information Display
- Information Display
- Virtual Gauges
- Engine Speed RPM Detail
- Ignition Timer
- Trip Information
- Truck Information
- Diagnostic Display
- Transmission Display
- Active Warnings
- Clock
- Settings
- Menu Control Switch
- Switches in the Center Console
- Dual Station Switch
- Steering Column Controls
- How to Use the Turn Signal
- How to Turn on High Beams
- How to Momentarily Flash High Beams
- How to Flash Marker and Clearance Lights
- Operate the Windshield Wipers
- How to Spray Windshield Washer Fluid
- Trailer Brake Hand Valve
- Heating and Air Conditioning
- Air Conditioner Control Panel
- How to Manually Control the Air Conditioner for the Cab
- Dash Switches
- Axle, Diff-Lock - Dual
- Axle, Diff-Lock - Forward Rear
- Axle, Diff-Lock - Steer
- Axle, Diff-Lock - Rear Rear
- Axle, Diff-Lock - Single Rear
- Axle, Inter-Axle Differential Locked (Tandem)
- Axle, Differential Lock - Tridrive
- Axle, Two Speed
- Batteries, Low Voltage Disconnect (LVD)
- Brakes, ABS Off-Road
- Brakes, Parking Brake Valve
- Cab Dimmer Switch
- Dump Truck Gate
- Engine, Brake On/Off
- Engine, Cruise Control On/Off
- Engine, Cruise Control Set/Resume
- Engine, Fan Override
- Engine, Heater
- Engine, Remote Throttle
- Engine, Overspeed Air Shutdown (Manual)
- Engine, Overspeed Air Shutdown (Test)
- Engine, Under Hood Air Intake
- Exhaust, Diesel Particulate Filter (DPF) Regeneration
- Fifth Wheel Slide
- Fuel Heater
- Generic Air, Accessory
- Generic, Spare SPARE
- Ignition Key Switch
- Lights, Auxiliary
- Lights, Beacon
- Lights, Daytime Running (Override)
- Lights, Dome
- Lights, Flood
- Lights, Flood (Spare)
- Lights, Fog
- Lights, Hazard
- Lights, Headlight
- Lights, Marker/Clearance
- Lights, Marker/Clearance/Trailer
- Lights, Park Light
- Lights, Spot
- Mud and Snow Traction Control
- Pintle Hook
- Power Take-off (PTO)
- Power Take-off (PTO), Forward
- Power Take-off (PTO), Rear
- Suspension, Axle, Pusher
- Suspension, Axle, Tag
- Suspension, Dump
- Suspension, Air Retention
- Suspension, Third Axle Lift
- Trailer Air Supply
- Trailer, Axle (3rd Axle) Lift
- Trailer, Axle Lift Forward
- Trailer, Axle Lift Rear
- Trailer, Belly Dump
- Trailer, Dump Gate
- Trailer, Belly Dump Gate Center
- Trailer, Belly Dump Gate Front
- Trailer, Belly Dump Gate Rear
- Trailer, Hotline
- Trailer, Suspension Air Dump
- Transmission, Transfer Case
- Transmission, Transfer Case 2 Speed
- Winch Clutch
- Driving
- Starting and Operating
- How to Use Engine Start Switch on Right Hand Drive
- Starting and Warming Up
- Engine Operations
- Transmission
- Brakes
- Axle and Suspension
- Aftertreatment System
- Dual Steer Operation
- Driving Tips and Techniques
- Stopping the Vehicle
- Maintenance
- Maintenance Schedule
- New Vehicle Maintenance Schedule
- Lubricants
- Checking Oil Level
- Inspect Power Steering Fluid
- What is the Air System?
- What is an Air Dryer?
- Air Tanks
- How to Check for Air System Leaks
- What is an Air Compressor?
- Brake System
- Cab Maintenance
- Cooling System Maintenance
- Safety Restraint System - Inspection
- Windshield Wiper/Washer
- Electrical System
- Engine Maintenance
- Fuel System
- Frame
- Front Axle and Suspension
- Heater and Air Conditioner Maintenance
- Noise and Emission Control
- Rear Axle and Suspension
- Steering System
- Driveline
- Tires
- Wheels
- Transmission Maintenance
- Mechanical Clutch
- Specification Reference Charts
- Information
- Index
5. Place the dipstick back into the
holder.
6. Pull the dipstick out again and
check the oil level. The oil level
should always be between the 2
marks on the dipstick.
Engine Oil Dip Stick Markings
1
2
1. High oil level (1)
2. Low oil level (2)
7. Reinstall the dipstick and twist to
lock it in place.
See Also
Engine, Oil Temperature
on page 62
Engine, Oil Pressure on page 62
Topping Up the Engine Oil
1. Top up with oil, if necessary, via the
filler opening. Use the correct grade
in the correct quantity. For oil
replacement, please see engine
Operator’s Manual included with this
chassis.
2. After topping up, wait 1 minute and
check the oil level again.
3. Reinstall the oil fill cap and twist to
lock it in place.
Install Engine Belt
You can extend the reliability and service
life of your vehicle's drive belts with proper
attention to installation, and maintenance.
Neglect could cause belt failure. The result
could be the loss of the electrical or air
system as well as possible engine damage
from overheating. So it's a very good idea
to check your belts frequently and replace
them as soon as you detect trouble.
NOTE
See the engine manufacturer's operator's
manual for further information on replacing
engine drive belts.
Follow this procedure to install an
accessory drive belt:
1. Route the new belt around the
pulleys, and then rotate the
MAINTENANCE - Engine Maintenance
188 Y53-6096-1A1 (01/17)
5