operators_manual

System Component Task I A B C D E
Drive Axle (Dana) Axle Housing Visually inspect for damage or leaks. •
Check oil level. Check "cold." Torque the drain plug. •
Drain the lubricant while warm. Flush each unit with
clean flushing oil. Change the lubricant.
See manufacturer's service requirements.
Air Shift Unit Check the lubricant level. •
Remove the housing cover and drain the lubricant.
Wash the parts thoroughly and dry in air.
•
Breather Clean or replace. •
Lube Pump (ON HIGHWAY) Remove the magnetic strainer and inspect for wear
particles. Wash in solvent and dry in air.
•
Lube Pump (OFF HIGHWAY) Remove the magnetic strainer and inspect for wear
particles. Wash in solvent and dry in air.
•
Lube Filter (ON HIGHWAY) Change. •
Lube Filter (OFF HIGHWAY) Change. •
Magnetic Drain Plug and Breather (ON HIGHWAY) Clean or replace. •
Magnetic Drain Plug and Breather (OFF HIGHWAY) Clean or replace. •
MAINTENANCE - Maintenance Schedule
136 Y53-6096-1A1 (01/17)
5