operators_manual

System Component Task I A B C D E
Front Axle Total Vehicle Alignment Check and adjust as required. • •
Steering Knuckle Spindles, Thrust Bearings, Kingpins,
Drawkeys, Tie Rod Ends, Steering Stops, and
Bushings.
Inspect for wear and damage and endplay. Shim or
replace as required; see Front Axle and Suspension on
page 194.
•
Kingpin Bushings, Thrust Bearings, and Tie Rod Ball
Ends
Lubricate with approved grease.
•
Drawkeys Tighten nuts • •
Front Axle (Dana) Total Vehicle Alignment Check and adjust as required. • •
Kingpin Bushings, Thrust Bearings, and Tie Rod Ball
Ends (ON HIGHWAY)
Lubricate with approved grease.
•
Kingpin Bushings, Thrust Bearings, and Tie Rod Ball
Ends (OFF-HIGHWAY)
Lubricate with approved grease.
•
Steering Knuckle Spindles, Thrust Bearings, Kingpins,
Drawkeys, Tie Rod Ends, Steering Stops, and
Bushings (ON HIGHWAY)
Inspect for wear and damage and for endplay. Shim or
replace as required. •
Steering Knuckle Spindles, Thrust Bearings, Kingpins,
Drawkeys, Tie Rod Ends, Steering Stops, and
Bushings (OFF-HIGHWAY)
Inspect for wear and damage and for endplay. Shim or
replace as required. •
MAINTENANCE - Maintenance Schedule
134 Y53-6096-1A1 (01/17)
5