OPERATOR'S MANUAL

Preventive Maintenance Engine Cooling System
Medium Duty
(R05/09) Y53-6027 – 181 –
Proper Coolant Level
NOTE: Do not overfill a cooling system. Excess
coolant may result in overflow, loss of antifreeze,
and reduced corrosion protection.
Check the coolant level after each trip. Add coolant as
necessary. You may find your coolant level is not up to the
correct level soon after you have filled the radiator. This
may be because all the trapped air in the system has not
yet been purged. It takes a little time for all the air to leave
the system after you fill your radiator.
Refilling Your Radiator
1. Be sure the radiator and engine block drains are closed.
2. Move the heater control to maximum heat position.
3. Remove the surge tank pressure cap
4. Through the surge tank, fill the system with premixed
coolant. Pour it in a steady flow until the radiator is full.
5. Start the engine.
6. Idle at low RPM.
7. Complete the filling. Do it as quickly as possible.
8. Idle the engine until it reaches normal operating temper-
ature.
9. Fill the radiator as necessary to raise the coolant level to
the proper reading. Replace the surge tank pressure
cap.
Cooling System Expansion Tank
FILL
COOLANT
EXPANSION
TA NK