User Manual

• Notifications – Shows active
warnings and components
monitored by a systems check.
• Custom View – Configures the
custom gauge view:
•
Custom View ON/OFF –
Enables the custom view.
• Edit – Changes the gauges
shown in the custom view (see
Custom Setup on page 72).
• Reset – Returns custom view to
its default configuration.
• Settings – Customizes the display
and enables functionality (see
Settings on page 76).
• Trip Info – Shows information
concerning truck use between trips
(see Trip Summary on page 75).
• Truck Info – Truck information
stores data about the vehicle (see
Truck Info on page 76).
Trip Summary
Trip Summary displays information
concerning truck use between trips. This
information is collected into the total trip
(called the Full Trip) and optionally, several
sub-trips (each identified with a letter). Trip
Summary collects and totals data until the
Trip has been reset or the max total
distance is reached, at which point no
further trip information will be added. The
max total distance for the main trip is
99,999.9 and 9,999.9 for a sub-trip.
Each trip can be scrolled to and selected
by turning the Scroll and then pressing
Select.
Each trip contains the following categories:
• Distance – Shows the distance
traveled during the sub-trip or the
total distance traveled during all
trips.
• Trip Info – Shows information about
fuel use, trip time, cruise control
usage, and engine load.
• Time Stamp – Shows the start and
stop times, and the dates for the
selected trip.
• Idle – Shows the fuel usage and
time spent when idling.
• PTO (option) – Shows information
about PTO specific usage during
the trip.
The information contained in these
categories can be viewed by scrolling
within that specific trip sub-menu.
CONTROLS - Menu
Y53-6113-1A1 (11/20) 75
3