User Manual

WARNING
If this chassis is equipped with an
Electronic
Stability Control (ESC) and
is modified (e.g. adding or removing
an axle, converting from a truck to a
tractor, converting from a tractor to a
truck, changing the body, lengthening
of the wheelbase and/or frame, relo-
cating frame components, or modifying
pneumatic or electrical ABS/ESC har-
nesses) the ESC must be evaluated
by a qualified technician. If you have
any questions, contact your authorized
dealer. Failure to comply may result in
property damage, personal injury, or
death.
NOTE
For more information about the stabili-
ty
control system installed on your ve-
hicle, please refer to additional materi-
al supplied with this operator manual,
included in your glove box information-
al packet.
Axle, Traction Control
Monitors wheel speed for poor traction. If a
wheel begins to slip due to poor traction, it
may reduce engine power or apply brakes
in an ef
fort to regain traction.
• Illuminates during the Bulb Check
when the ignition is turned ON. It
turns off after a few seconds if no
system problems are detected. If
an ATC problem is detected, the
ATC warning light will turn on and
stay on.
• Illuminates when the ATC is
regulating wheel spin and turns off
after the traction control event has
ended.
• Flashes continuously when the
ATC/Deep Snow & Mud switch is
turned on, indicating that this
feature is active.
WARNING
If this chassis is equipped with an
Electronic Stability Control (ESC) and
is modified (e.g. adding or removing
an
axle, converting from a truck to a
tractor, converting from a tractor to a
truck, changing the body, lengthening
of the wheelbase and/or frame, relo-
cating frame components, or modifying
pneumatic or electrical ABS/ESC har-
nesses) the ESC must be evaluated
by a qualified technician. If you have
any questions, contact your authorized
dealer. Failure to comply may result in
property damage, personal injury, or
death.
NOTE
For more information about the stabili-
ty
control system installed on your ve-
hicle, please refer to additional materi-
al supplied with this operator manual,
included in your glove box information-
al packet.
Check Transmission
CONTROLS - Warning Lights and Indicators
Y53-6113-1A1 (11/20) 57
3