User Manual

Headlights
Maintaining Headlight Performance
WARNING
LED replacement light sources are not
approved for use in this headlamp and
could result in a thermal event due to
the highly focused internal optics. Dam-
age caused by the use of LED light
sources is not warrantable. Failure to
comply may result in property damage,
personal injury, or death.
NOTE
one headlamp.
NOTE
Know what type of headlamps your ve-
hicle is equipped with (Standard Incan-
descent, Halogen, or LED). For light
bulb replacement types, refer to Vehicle
Light Bulb Specifications on page 283.
Headlight Features
1
1
1
1
2
3
4
5
1. Vents - NON SERVICEABLE -
(removal will destroy).
2. Turn signal/side marker bulb
socket.
3. Headlight beam-angle adjustment
knob.
4. High/Low beam main headlight
bulb socket.
5. Daylight Running light (DRL) bulb
socket.
MAINTENANCE - Headlights
230 Y53-6113-1A1 (11/20)
5
A headlight bulb is the brightest it will
ever be when it is new, and becomes
dimmer over time. A bulb that has been
used for 100,000 miles is approximately
half as bright as a new bulb. If you
expect optimum performance, consider
replacing your bulbs frequently. Keep a
spare or even used bulb in the glove
compartment and never run with only