User Manual

CAUTION
Do not direct high pressure water onto
electrical
components, plug connec-
tors, seals or flexible hoses on the en-
gine. Failure to comply can accelerate
corrosion and degrade electrical com-
ponent which may cause a fire or
equipment damage.
5. Wipe everything dry with a chamois
to avoid water spots. T
o prevent
water spotting, dry off the cosmetic
surfaces with a clean cloth or
chamois.
6. Remove road tar with an
automotive-type tar remover or
mineral spirits.
7. After cleaning and drying the entire
vehicle, apply a quality automotive
wax to protect the vehicle's finish.
Cab HVAC Fresh Air Filter
Replacement
The fresh air filter for the cab HVAC is
located in the air intake housing that is
mounted to the firewall in the passenger
side rear corner of the engine
compartment. The filter can be replaced
without using any tools.
1.
Tilt the hood open.
2. Locate the air intake housing at the
passenger side rear corner of the
engine bay, below the rain tray.
3. Locate the filter cover labeled
“OPEN” with an arrow pointing
towards the rear of the vehicle.
Slide the filter cover towards the
rear of the vehicle, until you are
able to remove the cover
.
4. Remove and inspect the filter,
referring to the maintenance
interval schedule.
5.
Install the new air filter into its
housing, taking care to align the
airflow direction indicated on the
filter element with the airflow
direction that's marked on the air
intake housing.
6. Replace the filter cover on the air
intake housing and slide the cover
toward the front of the vehicle. An
audible "snap" sound can be heard
when the cover is correctly
installed. If the snap feature is
damaged there are two screw
features that may be used to
secure the cover.
7. Close and secure the vehicle's
hood.
MAINTENANCE - Cab Maintenance
222 Y53-6113-1A1 (11/20)
5