User Manual

CAUTION
DO NOT aim the water jet directly at
door
locks or latch. Tape the key holes
to prevent water from seeping into the
lock cylinders. Water in lock cylinders
should be removed with compressed
air. To prevent locks from freezing in
the winter, squirt glycerin or lock deicer
into the lock cylinders.
NOTE
To allow enough time for your truck's
finish
to cure, wait at least thirty days
after the date of manufacture before
waxing.
1. Begin by spraying water over the
dry surface to remove all loose dirt
before applying the car wash
solution.
CAUTION
Do not direct high pressure water onto
seals
or flexible hoses. Water may en-
ter the part which will contaminate the
system
lubricants and fluids. To pre-
vent damage to these components,
keep a gentle flow of water moving at
all times. Failure to comply may result
in equipment damage.
CAUTION
Do not direct high pressure water onto
electrical
components, plug connec-
tors, seals or flexible hoses on the en-
gine. Failure to comply can accelerate
corrosion and degrade electrical com-
ponent which may cause a fire or
equipment damage.
• Do not wash the vehicle in
direct sunshine.
•
Do not spray water directly into
the cab vents.
2. Using soapy water, wash the
vehicle with a clean soft cloth or a
soft brush made for automotive
cleaning.
• Use cool water and a mild,
automotive-type soap. Strong
industrial detergents, cleaning
agents and household-type
soaps are not recommended
and may damage the vehicle's
paint.
•
Do not use stiff brushes, paper
towels, steel wool, or abrasive
cleaning compounds because
they will scratch painted, plated,
and polished metal surfaces.
3. Rinse painted surfaces with gentle
water pressure frequently while
washing to flush away dirt that
might scratch the finishes during
the washing operation.
4. Hose dirt and grime from the entire
chassis.
CAUTION
Do not direct high pressure water onto
seals or flexible hoses. Water may en-
ter the part which will contaminate the
system lubricants and fluids. To pre-
vent damage to these components,
keep a gentle flow of water moving at
all times. Failure to comply may result
in equipment damage.
MAINTENANCE - Cab Maintenance
Y53-6113-1A1 (11/20) 221
5