User Manual

Table Of Contents
resume and the light on the switch
will turn of
f.
Driver Controlled Main Differential
Lock
If your vehicle has a Meritor axle with a
Driver Controlled Main Differential Lock,
install the caging bolt before removing the
axles for towing. Installation of the caging
bolt prevents damage by locking internal
axle components in position. Use the
procedure below to lock the Meritor
differential.
Driver Controlled Main Differential Lock
1. Air Line - Remove to Install Caging
Bolt
2.
Caging Bolt Storage Location
1. Remove the air line.
2. Remove the caging bolt from its
storage hole.
3.
Screw the caging bolt all the way
into the air line hole. This locks the
differential by pushing a piston into
lock position.
Dual Range (Two-Speed) Rear Axle
Your vehicle may be equipped with a two-
speed or dual range axle (option). The low
range provides maximum torque for
hauling heavy loads or traveling over rough
terrain. The high range is a faster ratio for
highway speeds and general over-the-road
conditions. A switch on the accessory
switch panel controls the dual range rear
axle. Y
ou will notice that the switch has a
guard to protect you from activating it
accidentally. Always park your vehicle with
the range selector in LOW.
Important tips on operating a dual range
axle with inter-axle differential:
Shift the axle with the inter-axle
differential in the unlocked position
only.
When you are driving with poor
traction, lock the differential. When
you have the differential locked,
drive with the axle in LOW range
only.
When you are driving on a surface
with good traction, keep the inter-
axle differential unlocked. You can
drive with the axle in the LOW or
HIGH range.
Always UNLOCK the inter-axle
differential before shifting the axle
speed range.
WARNING
Never shift the axle when moving
downhill. Engine driveline disengage-
ment may occur, eliminating engine re-
tardation and allowing the wheels to
spin faster than the current speed of
the engine. This may require severe
braking to slow the vehicle down and
can result in an accident. Failure to
comply may result in death, personal
injury, equipment or property damage.
DRIVING - Axle and Suspension
Y53-6113-1A1 (11/20) 149
4