User Manual

been pressed since the vehicle has been
started. In vehicles with Eaton
transmissions, the cruise control switches
may be located on the shift control knob.
The left switch pod on the steering wheel
contain buttons for the cruise control.
Left Switch Pod
4 25 1
3
1. T
rip
2. Variable Road Speed Limiter
(VRSL) LIM+ and LIM-
3. Cruise Control ON/OFF
4. Cruise Control (CC) SET+ and
RES-
5. Toggle
The switches on the left side of horn pad
manage vehicle speed functions like cruise
control and variable road speed limiter
(option). If the vehicle has adaptive cruise
control (option), predictive cruise control
(option), etc., the toggle switch is also used
to operate that system.
How to Set Cruise Control Speed
The vehicle speed must be greater than 19
mph (30 kph) for PACCAR powered
vehicles or 30 mph (49 kph) for Cummins
powered vehicles and the engine speed
must be over 1,100 rpm for the cruise set
speed to work.
This vehicle may have Cruise Control
buttons located on the steering wheel
instead of the switches on the dash.
1. Turn on the cruise function using
Cruise Control ON/OFF
The Cruise Control indicator
appears on the display.
2. Accelerate the vehicle using the
accelerator pedal to the desired
cruise speed.
3.
Press SET to set the cruise speed.
NOTE
Cruise Control may not hold the set
speed
going down hills. If the speed
increases going down a hill, use the
brakes to slow down. This will cancel
Cruise Control.
The Cruise Control indicator turns
green (indicating a cruise speed
has been set) with the cruise speed
appearing beside it.
How to Change Cruise Set Speed
The vehicle cruise control must be on and
the cruise speed engaged.
1.
To increase speed:
• Press the "+" button on the
Right Steering wheel pod if
available, or
DRIVING - Engine Operations
Y53-6113-1A1 (11/20) 125
4