User Manual

NOTE
The vehicle is equipped with a park
brake warning system. If the driver’s
door is opened while the engine has
been switched off and the park brake
has not been applied, an acoustic sig-
nal is given and a warning symbol is
show on the instrument panel.
Menu Control Switch (MCS)
.
By pressing the Menu Control Switch
(MCS) from a black screen, the main menu
is opened.
Turn the MCS to switch between options in
the main menu.
By pressing the MCS, the selected option
is entered and sub menu 1 appears. See
section Menu Overview on page 52 .
Turn the MCS to browse through the
options in sub menu 1.
By pressing the MCS, the option is
entered. Depending on the selected option,
either sub menu 2 or the information and
settings screen appears.
If a second sub menu is present, the
information and settings screens are
opened by entering one of the displayed
options. See section Menu Overview on
page 52 .
Scroll through the various options in the
information screens by turning the MCS.
Change the values in the settings screens
by turning the MCS.
Select an option or confirm a value by
pushing the MCS.
Use the ‘Exit’ key under the MCS to go
back in the menus.
A short press to go back to the main menu
and a long press to close the menu.
NOTE
With the ignition key in the accessory
position (A) only a limited number of
functions are active on the main menu.
Menu Selector Switch
By pressing the menu selector switch, the
main menu will be selected and the
selector bar will become visible.
Turning the menu selector switch will
switch between screens in the main menu.
The triangle on the right-hand side of the
display shows the direction in which you
can proceed.
By pressing the menu selector switch, the
function/information chosen will be
CONTROLS - Master Display
Y53-6078-1B1 (12/18/18) 51
3