User Manual
Table Of Contents
- Safety
- Emergency
- Controls
- Entering and Leaving the Vehicle
- Doors
- Electrically Operated Windows
- Heated Mirrors
- Mirrors
- Electrical Mirror Adjustment
- Windshield Wiper Blades
- Roof Console
- Sun Visors
- Stepwell Lighting
- Interior Lighting
- Dashboard
- Control Panel
- Control Panel of Heating/Ventilation System
- Air Conditioning Switch
- Fan Speed Selector Switch
- Temperature Adjustment
- Air Distribution Selector Switch
- Center Console
- Left-Hand Steering Column Switch
- Right-Hand Steering Column Switch
- Steering Wheel Switches
- Adjustable Steering Column
- Seats
- Master Display
- PDC and Voltage Display
- Power Distribution Center (PDC)
- Voltage Converter
- Driving
- General
- Steering Lock/Contact/Starter Switch
- Glow System
- Starting Procedure
- Engine Speed Control
- Cruise Control
- Adaptive Cruise Control (Optional)
- Vehicle Speed Limitation for Special Applications
- Driving Style
- Steering
- ABS Brakes
- Park Brake and Service Brake
- Engine Brake
- Stopping
- Allison Automatic Gearbox
- Maintenance
- Introduction
- Air Dryer
- Overhaul
- Air Tanks
- Air Gauges and Air Leaks
- Air Compressor
- Overview of Daily Checks
- Opening the Front Panel
- Engine Oil Level
- Topping Up Coolant
- Special Coolant Fill Instructions
- Windshield Washer Reservoir Fluid Level
- Air Filter Indicator
- Wheels and Tires
- Lighting and Instruments
- Driver's Seat and Mirrors
- Overview of Weekly Checks
- Power Steering Fluid Level
- Brake System Air Drier
- Draining the Water Separator
- Batteries
- General Maintenance
- Cab Maintenance
- Cleaning
- Preventative Maintenance before the Winter Season
- Diesel Fuel
- Windshield Washer Reservoir
- Maintenance after the Winter Season
- Cooling System
- Information
- Glossary
- Index
Cooling
1. Switch the air conditioning on.
2. Switch the recirculation to position 1, 2
or 3.
3. Turn the temperature control switch to
the desired position. For maximum
cooling set the knob to the far left
position in the blue area.
4. Open the side and center vents.
While heating, it is possible to use the air
conditioning to remove moisture from the
air in the cab. This has the advantage that
demisting of the window glass will be
quicker.
Dehumidification
1. Switch the air conditioning on.
2. Turn the Fan Speed Switch to the
Fresh Air setting.
3. Open the vents on the center console
and side windows and set them as
desired.
4. Control the temperature as desired.
5. Adjust the volume of air using the fan
speed selector switch.
NOTE
The air conditioning system is switch-
ed off when the engine coolant tem-
perature becomes too high. This will
protect the engine.
WARNING
Excessive heat may cause the pres-
surized components of the air condi-
tioning system to explode. Never weld,
solder, steam clean, or use a blow
torch near any part of the air condition-
ing system. Failure to comply may re-
sult in personal injury, death, equip-
ment or property damage.
WARNING
Air conditioning refrigerant can be haz-
ardous to your health. Do not expose
yourself to leaking refrigerant for pro-
longed periods near excessive heat,
open flames, or without proper ventila-
tion. Failure to do so may result in
death or personal injury.
NOTE
If the air conditioning system fails to
work properly, it must be repaired by
qualified personnel as soon as possi-
ble, to avoid further damage to the
system.
Fan Speed Selector Switch
Fresh Air Position or Re-Circulation
Position
The fan has two speeds: one applies to re-
circulation the other to fresh air. The
recirculation position is suited to quickly
de-mist or cool the cab with the air
CONTROLS - Fan Speed Selector Switch
Y53-6078-1B1 (12/18/18) 41
3