User Manual
Table Of Contents
- Safety
- Emergency
- Controls
- Entering and Leaving the Vehicle
- Doors
- Electrically Operated Windows
- Heated Mirrors
- Mirrors
- Electrical Mirror Adjustment
- Windshield Wiper Blades
- Roof Console
- Sun Visors
- Stepwell Lighting
- Interior Lighting
- Dashboard
- Control Panel
- Control Panel of Heating/Ventilation System
- Air Conditioning Switch
- Fan Speed Selector Switch
- Temperature Adjustment
- Air Distribution Selector Switch
- Center Console
- Left-Hand Steering Column Switch
- Right-Hand Steering Column Switch
- Steering Wheel Switches
- Adjustable Steering Column
- Seats
- Master Display
- PDC and Voltage Display
- Power Distribution Center (PDC)
- Voltage Converter
- Driving
- General
- Steering Lock/Contact/Starter Switch
- Glow System
- Starting Procedure
- Engine Speed Control
- Cruise Control
- Adaptive Cruise Control (Optional)
- Vehicle Speed Limitation for Special Applications
- Driving Style
- Steering
- ABS Brakes
- Park Brake and Service Brake
- Engine Brake
- Stopping
- Allison Automatic Gearbox
- Maintenance
- Introduction
- Air Dryer
- Overhaul
- Air Tanks
- Air Gauges and Air Leaks
- Air Compressor
- Overview of Daily Checks
- Opening the Front Panel
- Engine Oil Level
- Topping Up Coolant
- Special Coolant Fill Instructions
- Windshield Washer Reservoir Fluid Level
- Air Filter Indicator
- Wheels and Tires
- Lighting and Instruments
- Driver's Seat and Mirrors
- Overview of Weekly Checks
- Power Steering Fluid Level
- Brake System Air Drier
- Draining the Water Separator
- Batteries
- General Maintenance
- Cab Maintenance
- Cleaning
- Preventative Maintenance before the Winter Season
- Diesel Fuel
- Windshield Washer Reservoir
- Maintenance after the Winter Season
- Cooling System
- Information
- Glossary
- Index
Tilting Forward
• Apply the parking brake.
• Put the gear lever in "neutral"
position.
• Close the doors.
• Turn the lever fully to the right,
against the spring pressure, until it
is locked in position ⇑; use the jack
rod.
• Operate the pump so that the cab
tilts forward. The cab locking
mechanism automatically releases.
As soon as the cab passes its
natural point of balance, the force
of gravity will gradually tilt the cab
further forward without additional
pumping.
Tilting Back
• Turn the lever to position ⇓.
• Tilt the cab back by operating the
pump with the jack rod. The last
part of tilting-back is effected by
the cab's own weight. When the
catch engages, the cab is
automatically locked.
• Leave the lever in position ⇓.
• Push the gear lever in 1st gear to
lock the gearbox control.
• Put the gear lever in neutral.
Checking the Cab Locking
When the cab is back in its normal
position, the cab lock warning lamp in the
master display should be extinguished.
Replacing the Poly-V Belt
Important
Always fit the same type of poly-V belt as
the one being replaced.
1. Disconnect the earth lead from the
battery.
2. Place a ratchet (A) with a 3/8" socket
in the arm of the automatic belt
tensioner (B).
3. Slacken the poly-V belt (C) (see arrow
in illustration), so that it can be
removed from the pulleys.
4. Carefully allow the automatic belt
tensioner to spring back to the stop.
5. Push the poly-V belt between the fan
and the wind tunnel collar and remove
the poly-V belt.
6. Check all pulleys over which the poly-
V belt runs for dirt, rust and damage.
EMERGENCY - Replacing the Poly-V Belt
Y53-6078-1B1 (12/18/18) 19
2