User Manual

Draining the Water
Separator
WARNING
When draining the water separator, an
amount of fuel will escape. Collect the
fuel and avoid the risk of fire.
Water in the fuel system may lead to
significant damage.
1. Place a container beneath the water
separator.
2. Remove the connector.
3. Unscrew the ring-shaped drain cock
(B) on the bottom of the water
separator in anti-clockwise direction.
4. Drain the filter until pure diesel fuel
comes out of the drain cock (A).
5. Turn the drain cock (B) if it abuts,
another 1/8 - 1/4 turn.
6. Check the drain cock (B) for leakage.
7. To prevent pollution, the drained
water/diesel fuel mixture should be
passed to the relevant authorities for
reprocessing.
Batteries
WARNING
Avoid sparks and open flames in the vi-
cinity of batteries.
Battery acid is an aggressive fluid.
In the event of contact with the skin:
rinse the skin profusely with plenty of
water.
Consult a doctor in the event of persis-
tent redness or pain.
Remove polluted clothing and rinse in
water.
In the event of contact with the eyes:
rinse with plenty of water for at least 15
minutes and consult a doctor.
If swallowed: do NOT induce vomiting.
Rinse the mouth, drink two glasses of
water and consult a doctor.
In the event of inhalation: get fresh air,
rest and consult a doctor.
• Check the electrolyte level; this
should be approx. 10 mm above
the plates or up to the level
indicator, if present. If necessary,
top up the batteries with distilled
water.
• Check that the battery poles and
terminals are clean and greased. If
necessary, coat the posts with an
acid-free petroleum jelly.
MAINTENANCE - Draining the Water Separator
Y53-6078-1B1 (12/18/18) 107
5