OPERATOR'S MANUAL

Maintenance Schedule and Lubrication Preventive Maintenance
– 122 –
PB1318 3/01 Model 330
Rear Wheel Bearings 100,000 With LMS Wheel End Package
Rear Brake Camshafts 10,000–15,000 Synthetic Grease With Special Fittings
Fifth Wheel 10,000–15,000 40 to 60K For Adjustment
Spring Pins 10,000–15,000 With Rubber Bushed Pins – No Service
Front & Rear Slack Adjusters 10,000–15,000 Synthetic Grease With Special Fittings
King Pins 10,000–15,000
Front Wheel Bearings 100,000 Eaton LMS
Accelerator Linkage None
Engine Lubricating Oil
– Check Fluid Level Daily Trip Check
– Change Oil 10,000–15,000 Must Meet Engine Company Specifications
Spring Shackle Pins 10,000–15,000 No Service With Rubber Bushed Spring Pins
Clutch Linkage 10,000–15,000
Clutch Release Bearing 10,000–15,000 Extended Grease Fittings
Clutch Cross Shaft 10,000–15,000 Extended Grease Fittings
Door Weatherstrip As Required
Lock Cylinders As Required
Door Hinges As Required Teflon Bushing
Door Latches and Striker Plate As Required
Driveshaft
– U-Joints 10,000–15,000 SPL Driveline, Up To 100,000 Miles
– Slip Joints 10,000–15,000 SPL Driveline
Center Bearing None
Suspension Per Specifications AG200 – Synthetic Grease With Special Fitting
Table 2 Recommended Maintenance Intervals
ITEM INTERVAL COMMENTS