OPERATOR'S MANUAL

Table Of Contents
Cab, Instruments and Controls
90
The operating panel of the auxiliary cab heater is in the rear wall of the cab.
Activation with vehicle contact off
1. Briefly press button (D). The display (A) and the buttons will light up. The burner
symbol and the standard set burning time are shown in display A. The heating is
activated; the auxiliary heater indicator in the centre console will light up.
2. The set burning time can be shortened with button (E) to a minimum of 1 minute
and increased with button (F) up to a maximum of 120 minutes.
3. The desired temperature can be set using rotary switch (G). The setting range
lies between 10 C and 30 C.
Switching off
1. Press button (D). The display and button illumination will be switched off.
A Display
B Time setting
C Program selection
D On/off
E Decrease setting
F Increase setting
G. Adjustable thermostat
Webasto
D0 00 572
A B C D E F G