OPERATOR'S MANUAL

Table Of Contents
Warnings and Safety Regulations
29
Inspections
- The system is only functioning correctly if:
- after turning the ignition on, an airbag message appears on the master
display which disappears after approx. 5 to 10 seconds.
- The system is not functioning correctly if:
- after turning the ignition on, no airbag message appears on the master
display.
- the airbag message on the master display has still not disappeared after
approx. 10 seconds after turning on the ignition.
- the airbag message appears on the master display when driving.
- If the system signals a fault, it will be unable to activate the airbag and/or seat
belt tensioners and will therefore not provide extra protection in the event of a
collision. Have the fault remedied by an approved Service dealer as soon as
possible.