OPERATOR'S MANUAL

Table Of Contents
Technical Data and Identification
247
DIESEL FUEL
Diesel fuel must meet the specifications according to EN 590.
Note:
It is prohibited to add petroleum (kerosene), petrol or any other additive to the diesel
fuel.
Fuel should have a lubricity effect according to the requirements below ("lubricity
standard"):
Always contact your authorized dealer to get to know whether it is or is not permitted
to use alternative fuels (e.g. biodiesel); the dealer can also tell you whether any
consequences are involved in using such fuels.
Sulphur content > 0.2%: Halve engine oil change interval to max.
of 25,000 km (15,534 miles)
test method: HFFR according to standard CEC-F
06-A96
test value: < 460 µm