OPERATOR'S MANUAL

Emergency repairs
220
4. Check whether the contact surfaces of the wheel rim and the drum brake are
clean. Clean if necessary.
5. Clean the wheel nuts and then apply a drop of oil between the thrust washer and
the nut.
6. Also apply a drop of oil to the first turn of the wheel-stud screw threads.
7. Fit the wheel nuts and tighten them evenly according to the sequence in the
illustration.
For the specified tightening torque, see "TECHNICAL DATA".
Note:
Wheel nuts should always be tightened and retightened in cold condition.
However, tightening wheel studs in extreme cold should be avoided.
8. Check the tire pressure.
D000520
1
1 1
7
8
2 2
5
6
34
5
3
4
6
2
3
4
5
6
7
8
9
10
D0 00 615