OPERATOR'S MANUAL

Table Of Contents
Emergency repairs
212
BLEEDING THE FUEL SYSTEM
Note:
When the hand pump is used, the fuel system will be automatically bled. The hand
pump is fitted against the back of the fuel tank on the water separator.
Bleeding
1. Loosen the hand pump knob anti-clockwise.
2. Use the hand pump until a clearly higher resistance is felt.
Note:
Stop pumping as soon as the higher resistance is felt. If you continue pumping,
the fuel system may become internally damaged.
3. Secure the hand pump knob by turning it clockwise.
D0 00 583