OPERATOR'S MANUAL

Table Of Contents
Coupling and Uncoupling
146
Uncoupling
1. Put wheel chocks in front and behind the trailer's rigid axle wheels.
2. Be absolutely certain that the trailer is braked.
3. Detach the brake pipes and cables for lighting and ABS/EBS.
4. Pull the safety pawl from the coupling and turn it 90. The trailer vehicle coupling
can only be opened in the centre position or the two outer positions of the
coupling jaw. (If the coupling jaw is crooked, the coupling pin cannot be
unlocked!)
5. Pull the lever up and drive the vehicle away.