OPERATOR'S MANUAL

Table Of Contents
Alarm System
35
DEACTIVATION LOADSPACE DETECTION SUPERSTRUCTURE/TRAILER
If you need to access the loadspace of the superstructure/trailer while retaining the
remaining detection options, the system can only be activated if the loadspace
detection is switched off. This avoids unnecessary sounding of the alarm.
The loadspace detection is deactivated as follows:
1. Deactivate the alarm system.
2. Press the "Switch off loadspace detection superstructure/trailer" switch. See
"CAB, INSTRUMENTS AND CONTROLS". The system LED will come on for
approx. 2 seconds.
3. Then activate the alarm system with button (1) on the hand-held transmitter. The
loadspace detection has now been switched off. It is then possible to stay in the
loadspace while retaining the other detection options.
To protect the loadspace again, the alarm system should first be switched off and
then back on again.