OPERATOR'S MANUAL
Table Of Contents
- Why this handbook is so important!
- Warnings and Safety Regulations
- Alarm System
- The system
- Use of the hand-held transmitter
- Self-diagnosis
- Use when staying in the cab
- Deactivation loadspace detection superstructure/trailer
- The system LED
- Loss of hand-held transmitter
- System does not respond to hand-held transmitter
- Battery, hand-held transmitters
- Maintenance
- Disconnecting the vehicle battery
- Cab, Instruments and Controls
- Cab
- Entering and leaving the vehicle
- Doors
- Electrically operated windows
- Mirrors
- Electrical mirror adjustment
- Windscreen wiper blades
- Bunks
- Roof console - oddments shelves
- Tool boxes/storage compartments
- Roof hatch
- Adjusting roof spoiler
- Sun visors
- Stepwell lighting
- Interior lighting
- Bunk lamp
- Dashboard
- Instrument panel
- Warning indicators
- Control panel
- Control panel of heating/ventilation system
- Air conditioning switch
- Fan speed selector switch
- Temperature adjustment
- Air distribution selector switch
- Centre console
- Roof console
- Left-hand steering column switch
- Right-hand steering column switch
- Steering column switch, engine brake
- Adjustable steering column
- Auxiliary cab heater (air heating)
- Seats
- Master Display
- Inspections and Maintenance
- Overview of daily checks
- Opening the front panel
- Engine oil level
- Topping up coolant
- Screen washer reservoir fluid level
- Air filter indicator
- Wheels and tires
- Lighting and instruments
- Driver's seat and mirrors
- Trailer vehicle
- Overview of weekly checks
- Clutch fluid level
- Power steering fluid level
- Brake system air drier
- Draining the water separator
- Batteries
- General maintenance
- Lubricating fifth wheel/trailer coupling
- Cab maintenance
- Cleaning
- Preventative maintenance before the winter season
- Diesel fuel
- Cab heater
- Windscreen washer reservoir
- Maintenance after the winter season
- Cooling system
- Coupling and Uncoupling
- Driving
- General
- Steering lock/contact/starter switch
- Glow system
- Starting procedure
- Immobiliser fault
- Engine speed control
- Cruise control
- Vehicle speed limitation for special applications
- Driving style
- Differential lock
- Steering
- RAS-EC system
- ASR (Anti Slip Control)
- ABS brakes
- Parking brake and service brake
- Engine brake
- Stopping
- Manual Gearbox
- Automatic Gearbox
- Air suspension
- Emergency repairs
- Vehicle tool kit
- Tilting the cab
- Replacing the poly-V belt
- Replacing the fuel fine filter
- Bleeding the fuel system
- Draining the water separator
- Releasing the parking brake
- Wheel winch
- Jacking up the front axle
- Jacking up the rear axle
- Changing the wheel
- Tire inflating connection
- Towing
- Replacing bulbs
- Fuses and relays
- Technical Data and Identification
- Consumer Information
- Alphabetical index
Technical Data and Identification
251
VEHICLE IDENTIFICATION LABEL
The vehicle identification plate is located on the door jamb.
Each vehicle uses a Vehicle Identification Number (VIN) that contains the model
year designation of your vehicle. The practice is in compliance with 49 CFR 565,
Code of Federal Regulations.The VIN contains 17 digits. The 10th digit is the code
for the model year of your vehicle. The example VIN below from a 1999 model
shows how this code works:
EXAMPLE VIN: 1XP 9D2X9 6 X D 345678
Model Year Serial Number
ALR TYPE PLATE
The ALR type plate (load-sensing valve) is on the right-hand door pillar.
The instruction plate contains details of the axle loads and output pressures; these
correspond to the order of the axles underneath the vehicle.
So "1" is the front axle, etc.
Therefore, the data on the instruction plate relating to the driven axle is important
when checking the load-sensing valve!
D0 00 635