OPERATOR'S MANUAL

Technical Data and Identification
239
WHEELS
Whenever the wheel nuts have been slackened or removed, they must be retorqued
with a torque wrench after 100 km (62 miles).
If a wheel stud is renewed, the other wheel studs on the relevant
wheel must also be renewed. If new wheel studs are fitted, the nuts
must be retorqued after 500 km (310 miles).
Wheel nut tightening torques
LF45
LF 55
Version with 6 M18 wheel nuts 370 Nm (272.9 lb ft)
Version with 8 M18 wheel nuts 370 Nm (272.9 lb ft)
Version with 8 M20 wheel nuts 485 Nm (357.7 lb ft)
Version with 10 M22 wheel nuts 700 Nm (516.3 lb ft)
}