OPERATOR'S MANUAL

Air suspension
204
STOP BUTTON
When the "Stop" button on the remote control unit is pressed, the system responds
as follows, irrespective of the vehicle speed:
- When the chassis height is being changed, the electropneumatic valves are cut
out immediately. The current height will now become the desired height.
- If the "stop" key is pressed while switching off the ignition, the delay setting is
activated. When this setting is activated, the height adjustment remains active
for 60 minutes when the ignition is switched off or until the air supply has
become insufficient.
Unless stated otherwise, the buttons only need to be pressed once briefly.