OPERATOR'S MANUAL

Seats
100
Seat belts only work properly when correctly tensioned. For this
reason, never use a clip or other device to reduce the seat belt
tension.
Always keep seat belts clean and dry. Clean the belts with an all-
purpose cleaner, not with caustic substances.
If the seat belts have been subjected to high loading during a
collision, the complete assembly must be renewed, even if there is
no visible evidence of damage. Have repairs to the seat belts
carried out by qualified personnel only. Never modify seat belts
yourself.
Wearing seat belts
- The belt must be tight against the body and not be distorted.
- With a three-point type belt, the shoulder section must be across centre of the
shoulder, not against the neck. The pelvis section should be as low as possible
across the pelvis, not across the abdomen.
- Do not put any hard, sharp or fragile objects such as pens, glasses or phones
between your body and the seat belt.
}
}
}