operators_manual

Table Of Contents
capable of displaying the temperature of
the road surface on either the temperature
display or the snowflake icon. Additionally
,
the outside air temperature reading may be
affected by exposure to direct sunlight.
View Indicator
The View Indicator identifies which view is
currently selected:
Favorites (if enabled)
Minimized
Minimized with Advance Driving
Assistance (Optional)
Basic
Enhanced
Sub-trip Odometer
The T
rip Odometer can be split into smaller
segments called Sub-trips. Start a Sub-trip
by pressing Trip on the steering wheel.
The maximum distance that the sub-trip
will show is 9,999.9 at which point it will
start over at zero. When it maxes out, the
current sub-trip ends and begins a new
one. Sub-trip information is also found in
the settings menu Trip Summary on page
72.
Trip Odometer
The Trip Odometer shows how far the
vehicle has gone traveled since last it was
reset. The maximum distance that can be
shown on the Trip Odometer is 99,999.9 at
which point the operator needs to reset.
Press Trip to set. Press and hold Trip to
reset (Item 1 in following image).
Left Switch Pod
4 25 1
3
1. Trip marker
2.
Limiter control
3. Cruise control ON/OFF
4. Cruise control set/resume
5. Toggle switch
CONTROLS - Peterbilt Digital Display
Drive, Neutral, and Reverse
Indicator
The Drive, Neutral, and Reverse Indicator
reflects the shifter position of an Automatic
Transmission. Manual transmissions and
certain automatic transmission do not
provide feedback to the display. Instead,
the transmission shifter indicates the gear
condition.
Y53-6110-1A1 (01/21) 65
3