operators_manual
Table Of Contents
- Safety
- Using this Manual
- Safety Alerts
- Illustrations
- General Safety Instructions
- Data Recorder
- Environmental Protection Agency
- Repairs
- Additional Sources of Information
- Cab Access
- How to Access the Upper Bunk
- Deckplate Access
- How to open the hood
- Seat
- What to do before starting the vehicle
- Vehicle Loading
- Visual inspection while approaching the vehicle
- Daily Checks
- Weekly Checks
- Systems Check
- Emergency
- Roadside Assistance
- Low Air Alarm
- Stop Engine Light
- Low Oil Pressure
- Engine is Overheating
- How to Inspect and Replace a Fuse
- Where are the Fuses Located?
- How to Jump Start a Battery
- How to Recover a Vehicle
- Manually Release the Parking Brake
- Recovery Hitch
- How to use a Recovery Hitch
- How to Prepare the Axles for Towing
- How to Manually Lock a Differential
- Recovery Hitch Capacities
- Best Practices for Recovery Rigging
- Returning to Service After Recovering
- What to do if the Vehicle is Stuck in Sand, Mud, Snow or Ice
- Towing the Vehicle
- Controls
- Instrument Cluster
- Peterbilt Digital Display Controls
- Peterbilt Digital Display
- Selecting a View
- Configure Settings
- Drive Summary
- Driver Rewards (option)
- Driver Performance Assistant (option)
- Bulb Check
- Guide to the Warning Symbols
- ADAS Camera Fault
- Axle, Stability Control (Option)
- Axle, Traction Control
- Brakes, Antilock Brake System
- Brake, Park Brake
- Brakes, Low Air
- Brakes, Trailer Antilock Brake System
- Cruise Control
- Differential, Inter-Axle Lock
- Dump Truck, Body Up
- Dump Truck, Gate
- Diesel Particulate Filter (DPF) Warning Light
- Emissions, High Exhaust System Temperature
- Emissions, Malfunction Indicator Light
- Engine, Check Engine
- Engine, Engine Block Heater
- Engine, Low Coolant Level
- Engine, Overspeed Air Shutdown
- Engine, Retarder (Brake)
- Engine, Stop Engine
- Engine Wait-to-Start Light
- Emissions, Engine Derate
- Fifth Wheel Slide Unlocked
- Fifth Wheel Locked
- Fifth Wheel Unlocked
- Lights, High Beam
- Lane Departure Warning (LDW)
- Lane Departure Warning (LDW) Fault
- Fast Idle Control
- Refrigerator
- Seat Belt Fasten
- Tire Inflation (TPMS)
- Transmission, Auxiliary
- Transmission, Check
- Turn Signal, Left
- Turn Signal, Right
- Optional Gauges
- Dash Switches
- Axle, Differential Lock - Tridrive
- Axle, Diff-Lock - Dual
- Axle, Diff-Lock - Forward Rear
- Axle, Diff-Lock - Rear Rear
- Axle, Diff-Lock - Single Rear
- Axle, Diff-Lock - Steer
- Axle, Inter-Axle Differential Locked (Tandem)
- Axle, Two Speed
- Back Up Alarm Mute
- Batteries, Low Voltage Disconnect (LVD)
- Brakes, ABS Off-Road
- Brakes, Parking Brake Valve
- Brake, Trailer Hand
- Cab Dimmer Switch
- Dump Truck Gate
- Engine, Fan Override
- Engine, Heater
- Engine, Remote Throttle
- Engine, Overspeed Air Shutdown (Manual)
- Engine, Overspeed Air Shutdown (Test)
- Engine, Under Hood Air Intake
- Exhaust, Diesel Particulate Filter (DPF) Regeneration
- Fifth Wheel Slide
- Fuel Heater
- Generic Air, Accessory
- Generic, Spare SPARE
- Ignition Key Switch
- Lane Departure Warning (LDW) Disable
- Lights, Automatic
- Lights, Auxiliary
- Lights, Beacon
- Lights, Daytime Running (Override)
- Lights, Dome
- lights, Exterior lights Self Test
- Lights, Flood
- Lights, Flood (Spare)
- Lights, Fog
- Lights, Hazard
- Lights, Headlight
- Lights, Marker/Clearance
- Lights, Marker/Clearance/Trailer
- Lights, Park Light
- Lights, Spot
- Mud and Snow Traction Control
- Pintle Hook
- Power Take-off (PTO)
- Power Take-off (PTO), Forward
- Power Take-off (PTO), Rear
- Suspension, Axle, Pusher
- Suspension, Axle, Tag
- Suspension, Dump
- Suspension, Air Retention
- Suspension, Third Axle Lift
- Trailer Air Supply
- Trailer, Axle (3rd Axle) Lift
- Trailer, Axle Lift Forward
- Trailer, Axle Lift Rear
- Trailer, Belly Dump
- Trailer, Dump Gate
- Trailer, Belly Dump Gate Center
- Trailer, Belly Dump Gate Front
- Trailer, Belly Dump Gate Rear
- Trailer, Hotline
- Trailer, Suspension Air Dump
- Transmission, Transfer Case
- Transmission, Transfer Case Two-Speed
- Winch Clutch
- Ignition Key Switch
- Exterior Lighting Self-Test
- Steering Column Controls
- Steering Wheel Controls
- Door Mounted Mirror Controls
- Heating and Air Conditioning
- Sleeper Alarm Clock
- Cab Accessories
- Driving
- Starting and Operating
- Starting and Warming Up
- Engine Operations
- Indicators around the speedometer
- Speed Limit
- Engine Brake Operation
- Engine Brake Operation for a Vehicle with Automated Transmission
- How to Deactivate MAX Mode
- Engine Brake Indicator
- How to change Fast Idle Control (FIC) Speed
- How to Start the PTO
- Engine Fan Control
- Using a Winterfront
- How to Set the Shutdown Timer
- Engine Aftertreatment System
- Driver Assistance
- Transmission
- Brakes
- Axle and Suspension
- Trailer Operations
- Driving Tips and Techniques
- What to Consider when using a Sleeper Bunk
- Stopping the Vehicle
- Maintenance
- New Vehicle Maintenance Schedule
- First Day
- First 50-100 mi / 80-160 km
- First 500 mi / 800 km
- First 2,000 mi / 3,218 km
- First 3,000-5,000 mi / 4,800-8,000 km
- Maintenance Schedule
- At first 15,000 mi / 24,000 km or at first PM
- Component Specific Intervals
- Every 15,000 mi / 24,000 km / Monthly
- Every 25,000 mi / 40,000 km / 6 Months
- Every 30,000 mi / 48,000 km
- Every 60,000 mi / 96,000 km / 6 Months
- Every 120,000 mi / 192,000 km / Annually
- Every 240,000 mi / 384,000 km
- Every 300,000 mi / 480,000 km / 6,750 Hours / 3 Years
- Every 500,000 mi / 800,000 km / 5 years
- Every 750,000 mi / 1,200,000 km/ 24,000 Hours / 8 years
- Lubricants
- Checking Oil Level
- Air System
- Dual Air System Function Test
- Air Dryer Maintenance
- Air Tanks
- Air Gauges and Air Leaks
- Air Compressor
- Brake System
- Cab Maintenance
- Cab Structure, Doors and Hoods
- Safety Restraint System - Inspection
- Cooling System Maintenance
- Electrical System
- Engine Aftertreatment System Power Requirements
- Low Voltage Disconnect (LVD) (option)
- How to Replace Headlight Bulbs
- Aiming Headlights
- Fuses, Circuit Breakers and Relays
- Altering the Electrical System
- Vehicle CAN Bus
- Batteries
- Under Cab Battery Access
- In Cab Battery Access
- Cranking Battery Specification
- Removing Batteries
- Installing Batteries
- Replace Battery Box Cover
- Slow Battery Charging
- Alternator
- Remote Keyless Entry
- Engine Maintenance
- Frame
- Fuel System
- Front Axle and Suspension
- Heater and Air Conditioner Maintenance
- Noise and Emission Control
- Diesel Exhaust Fluid (DEF) Tank Straps
- Rear Axle and Suspension
- Steering System
- Driveline
- Tires
- Wheels
- Windshield Wiper/Washer
- Transmission Maintenance
- Hydraulic Clutch
- Specification Reference Charts
- Information
- Index
Heater
CAUTION
During extreme cold weather, DO NOT
blow
hot defroster air onto cold wind-
shields. This could crack the glass.
Turn the Air Flow Control Dial to De-
frost and adjust the fan speed accord-
ingly while the engine warms. If the
engine is already warm, move the
Temperature Control Dial to "cool,"
then gradually increase the tempera-
ture when you see that the windshield
is starting to warm up. Failure to com-
ply may result in equipment damage.
• Check all heater controls for full-
range operation.
•
Check hoses, connections, and
heater core for condition and leaks.
Air Conditioner
WARNING
The air conditioning system is under
pressure.
If not handled properly dur-
ing servicing, it could explode. Any
servicing that requires depressurizing
and recharging the air conditioning
system
must be conducted by a quali-
fied technician with the right facilities
to do the job. Failure to comply may
result in death, personal injury, equip-
ment or property damage.
WARNING
Wear eye protection any time you blow
compressed
air. Small particles blown
by compressed air could injure your
eyes.
• Listen to the compressor and drive
clutch for noise and vibration. If you
find problems, have the system
checked thoroughly
. A
malfunctioning clutch usually
indicates trouble elsewhere in the
system.
• Check the evaporator core, filter,
and condenser core for debris
restricting air flow. Clean if
necessary. Small particles may be
removed with compressed air
blown through the core in the
opposite direction of normal air
flow.
• Check the engine belt for condition
and proper tension.
•
Check all hoses for kinks,
deterioration, chafing, and leaks.
Adjust kinked or chafing hoses to
eliminate restrictions and prevent
further wear.
• Check all components and
connections for refrigerant leaks. If
you discover a leak, do not try to
tighten a connection. Tightening a
connection may cause a leak to
worsen. Have a qualified technician
correct the problem.
NOTE
A leaking evaporator or condenser
core
cannot be repaired; it must be re-
placed.
Have the air conditioning system fully
serviced annually by your authorized
dealer
. Qualified service technicians will
have to evacuate and recharge the system.
MAINTENANCE - Heater and Air Conditioner Maintenance
Y53-6110-1A1 (01/21) 279
5










