operators_manual

The seats in this vehicle are equipped with
a switch that locks out the fore-aft isolator
function in the seat. When locked, the seat
will not move back and forth. It will be
rigidly fixed and only allowed to move up
and down with the vehicle’
s movements.
This vehicle may be equipped with a swivel
function on the passenger seat. This
function allows the passenger seat to
rotate and face towards the inside of the
cab.
WARNING
Always ensure that the passenger seat
is
locked into the forward facing posi-
tion when the vehicle is in motion.
Locking the swivel seat into the for-
ward facing position maximizes visibili-
ty to the surrounding area. Failure to
comply creates a safety hazard that
may result in death or personal injury.
WARNING
DO NOT use the swivel function while
a
passenger is in the seat and the ve-
hicle is in motion. The seat belt will not
provide proper protection if the pas-
senger is not facing forward and the
vehicle is in an accident. Failure to
comply may result in death or personal
injury.
SAFETY - Seat
which holds a door closed inside the air
filter housing. Fully engaged, the door will
open and air will enter from under the hood
instead of the opening on the side of the
hood.
Seat
This seat has up to ten different controls
that maximize the driver's comfort.
Lumbar (and bolster support if available)
are provided for superior support to the
back during operation. Lower support is
standard and the optional functions include
upper lumbar and bolster functions.
Pressing on the “+” symbol of the button
will add support in the area. Pressing the
opposite side of the button will release
pressure and will reduce support in the
area.
Y53-6110-1A1 (01/21) 23
1