operators_manual

Table Of Contents
Every 25,000 mi / 40,000 km / 6 Months
Front Axle - Linehaul (PACCAR) - Kingpin Joint Grease/Tie Rod Ends
Heavy-Duty Multipurpose Lithium Based: #1 or #2 Grade. (Refer to Front Axle and Suspension on page 275 for maintenance
instructions.)
Front Suspension - SOFTEK NXT (Hendrickson) - Shock Absorbers
Inspect for leaking, body damage, and damaged or worn bushings. Replace as required. Check the shock mounting stud
torque. (Refer to Front Axle and Suspension on page 275 for maintenance instructions.)
Front Suspension - SOFTEK NXT (Hendrickson) - Spring Pins and Shackles
Inspect for worn parts and excessive joint clearance. Shim or replace as required. (Refer to Front Axle and Suspension on page
275 for maintenance instructions.)
Front Suspension - SOFTEK NXT (Hendrickson) - U-bolts
Check the general condition and the tightness of the nuts. (Refer to Front Axle and Suspension on page 275 for maintenance
instructions.)
Front Axle - SOFTEK
®
NXT (Hendrickson) - Axle Clamp Through Bolts
Check the tightness of the through bolts at the bolt head. (Refer to the Hendrickson operator’s manual for torque specifications.)
Every 30,000 mi / 48,000
km
MAINTENANCE - Every 30,000 mi / 48,000 km
Y53-6110-1A1 (01/21) 211
5