operators_manual

Table Of Contents
fifth wheel will smoothly separate
from the trailer
.
Suspension Dump Symbol
9. Ease tractor forward, clearing the
trailer
.
10. If the rear suspension was
deflated, return rear suspension to
its normal height.
Air-Controlled Sliding Fifth Wheel
(option)
to protect you against accidentally
activating or releasing the lock.
WARNING
Do not move the fifth wheel while the
tractor-trailer
is in motion. Your load
could shift suddenly, causing you to
lose control of the vehicle, which can
result in an accident. Never operate
the vehicle with the switch in the UN-
LOCK position. Always inspect the
fifth wheel after you lock the switch to
be sure the fifth wheel lock is engag-
ed. Failure to comply may result in
property damage, personal injury, or
death.
How to Slide the Fifth Wheel
WARNING
DO NOT move the fifth wheel while
the
tractor-trailer is in motion. Your
load could shift suddenly, causing you
to lose control of the vehicle. Never
operate the vehicle with the switch in
the UNLOCK position. Always inspect
the fifth wheel after you lock the switch
to be sure the fifth wheel slide lock is
engaged.
Failure to comply may result
in death, personal injury, equipment or
property damage.
WARNING
Do not attempt to slide the fifth wheel
until
all persons and obstacles are
clear of the vehicle.
NOTE
This procedure assumes a connected
trailer
. The trailer kingpin must be
locked within the fifth wheel when
changing slide positions.
1. Position the tractor and trailer in a
straight line on firm, level ground.
2.
Place the tractor in neutral, and set
the tractor and trailer parking
brakes.
3. Unlock the slide by repositioning
the Fifth Wheel Slide switch.
DRIVING - Trailer Operations
Vehicles that have an air-controlled sliding
fifth wheel have a fifth wheel slider lock
controlled by a switch on the accessory
switch panel. To operate this type of lock,
move the switch to the appropriate
position. By placing the switch in the
UNLOCK position, you can slide the fifth
wheel to various positions to adjust weight
distribution. There is a guard on this switch
Y53-6110-1A1 (01/21)
181
4